This type is fully supported by a structural construction. In most cases it consists of a wooden box structure.<\/p>\n
The support of zinc gutters with a continuous support is part of the architectural construction and is usually made of wood. Zinc gutters can be fitted perfectly to<\/span> on unplaned timber. NedZink recommends that on new impregnated and glued wood a vapour permeable separation layer should be applied on the bottom of the gutter box to prevent damage from condensation on the backside of the zinc. The same advice also applies to supports made of concrete or other stony materials, where the dividing layer also prevents wear of the zinc. Before applying the zinc, check whether the supporting wooden box is clean and does not have any protruding nail heads or screws.<\/p>\n Are you interested in components that can be connected to zinc gutters with continuous support?<\/p>\n \u2192 Click here for more information about roof gutters <\/strong><\/span> \u2192 Hide information about roof gutters<\/strong><\/span><\/p>\n The box is to be measured at various places and following measurements should be taken:<\/p>\n The outlet piece in the supporting box construction must be spacious enough to allow the gutter to contract and expand. This means the outlet piece, with the \u00a0rain \u00a0pipe slipped around it must have an oval cavity with at least 20 mm space to the left and to the right and in the other two directions, at least 5 mm.<\/p>\n See figures 3.1.20 and 3.1.21. The following basic rules must be observed:<\/p>\n The zinc gutters are preferably prepared in the workplace as far as possible before installation, i.e:<\/p>\n The support is part of the building construction and is usually made of wood. Gutters of NedZink material can be applied directly to unplaned wood. NedZink recommends installing a vapour-permeable layer on newly-impregnated and bonded wood at the bottom of the gutter box in order to prevent attack by condensation on the backside of the zinc. The same advice also applies to supports of concrete or other stony materials, where the separating layer also prevents wear on the zinc. Before applying the zinc, check that the supporting wooden container is clean and does not contain protruding nail heads or screws.[\/vc_column_text][mk_padding_divider size=”20″][\/vc_column][\/vc_row]\n","protected":false},"excerpt":{"rendered":" [vc_row][vc_column][mk_padding_divider][\/vc_column][\/vc_row][vc_row el_class=”home-waarom-nedzink rij-wit-schaduw”][vc_column][mk_padding_divider size=”20″][vc_column_text css=”.vc_custom_1632293256435{margin-bottom: 0px !important;}”] Roof gutters in a wooden box This type is fully supported by a structural construction. In most cases it consists of a wooden box structure. Construction of the continuous support gutters The support of zinc gutters with a continuous support is part of the architectural construction and is […]<\/p>\n","protected":false},"author":9,"featured_media":0,"parent":28820,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-28892","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"\nMeasuring the box<\/h2>\n
\n
Opening of the outlet piece<\/h2>\n
Design of gutter<\/h2>\n
\n
Pre-processing of gutters<\/h2>\n
\n
Installation<\/strong><\/h2>\n
\n
Support<\/strong><\/h2>\n